Göldo MB05C Adapter Bushings

Start 360°

Adapter Bushings for Machine Heads

Makes it possible to mount vintage-style machine heads with a shaft diameter of 6.4 mm in a bore hole for enclosed machine heads of 10 mm
6 Pieces
MB05C
Surface: Nickel

30-Day Money-Back Guarantee

Available since July 2006
Item number 193586
Sales Unit 1 piece(s)

£8

All prices incl. VAT

Sales Rank

in Miscellaneous Guitar/Bass Spare Parts

This is what customers who viewed this product bought

Harley Benton Parts Copper Shielding Tape

£4.30

bought

TAD Cap Orange Drop 47nF 100V

£2.55

bought

Göldo SingleCoil Cable BK E9SCB

£3.44

bought

TAD Cap Orange Drop 22nF 100V

£1.66

173 Customer ratings

5 126 Customers 4 27 Customers 3 14 Customers 2 3 Customers 1 3 Customers

4.6 / 5

quality

Review guidelines

88 Reviews

My bad, they didn’t fit…

tremblox 07.01.2023

These are fine but didn’t fit my application. I’m writing this as a heads-up to others.
Firstly not all tuners, even Gotoh tuners have the same post/shaft diameter. Not even in the same series. Take for example the Kluson-style SD91 series. The units with magnum lock and height adjustable post/shafts - the HAP-M units - have 6mm post diameters. They fit too loosely in these bushings and as a result of the string tension the tuners will get sloppy and wear out prematurely over time.
On the other hand the standard SD91 tuners (no locking, height adjustment) have post diameters of ca 6,25mm (from memory so I might be off by a tad), so that these bushings will be a perfect fit and you’ll enjoy a lifetime of happiness with them.

So in all cases the buyer should check their post diameters carefully before selecting and trying to source the correct bushings. Take care, it’s a jungle out there.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Great product - Just not the right fit

Tiago Oliveira Coelho 21.07.2020

Bought a set of Klusons for my Classic 60's Tele (MIM) to replace the Kluson-style Ping/Fender stock tuners, but the bushings were too narrow for the pre-existing holes. So I found these conversion bushings and thought my problem was solved.
Before anything, I have to say that they're quite good, and feel very solid. A+ for building quality.

However, the holes for the tuners in my guitar is neither 8mm nor 10mm. If you have the same model as I do, either be prepared to enlarge the holes on the headstock to fit these, or just use aluminium tape on the narrow bushings to keep them in place.

Report

Does not fit all Gotoh locking tuners...

LeonardS 25.05.2021

I bought these to install the Gotoh SD-91-05M MG-T locking tuners as the bushing delivered with the tuners were too small for my Fender to fit well.
However, I can confirm that these Göldo MB05C bushings do NOT fit the tuners either as the diameter, like the Fender ones, are simply too small (narrow).
The Göldo MB05C go well with the other Gotoh SD-91 locking tuners, but for those the Fender bushings fitted as well.
The bushings themselves are ok.

Report

Goldo adaptor bushings mb05c

Byrnes C 03.06.2020

did the job perfectly great for fitting vintage style tuners into 10 mil holes without messing up the guitar
straight forward fitting

Report

Read all reviews

Göldo MB05C Adapter Bushings

Adapter Bushings for Machine Heads

This is what customers who viewed this product bought

173 Customer ratings

You have to be logged in to rate products.

88 Reviews

Smart Navigator

Served with love!

Göldo MB05C Adapter Bushings

Adapter Bushings for Machine Heads

This is what customers who viewed this product bought

Accessories & matching items

173 Customer ratings

You have to be logged in to rate products.

88 Reviews

Compare options

Smart Navigator