G
Works fine but has some quirks
EDIT: After some occasional use, I left it powered off for a month or so only to come back to a faulty channel 1 output. It powers on, works fine for 10 seconds and then slowly fades out until channel 1 stops working completely so in short an AliExpress cheap mixer works better than this.
OLD EVALUATION: First of all it's heavier and larger than I imagined which for some is not a big deal but honestly it's a bit heavy for what it is. That said the sound quality can be really good and I emphasize the "can be" since some tweaking is required or else it will sound distorted and noisy.
To get the best quality you absolutely need to use the ground cable and lower the volume on channel 1 connected device (not the mixer) to 30% while only going 50% on the mixer itself, this will remove any background noise while boosting the volume nicely. If you plug in already hot output to the channel 1 it will be very loud and distorted since it was designed with mic in mind. The channel 2 is quieter so you can go as high as 70% on the mixer without distortion however I noticed that if you go well over 70% it starts to distort badly.
So in short use your synth/input volume knobs instead of the mixer and you will be fine.
OLD EVALUATION: First of all it's heavier and larger than I imagined which for some is not a big deal but honestly it's a bit heavy for what it is. That said the sound quality can be really good and I emphasize the "can be" since some tweaking is required or else it will sound distorted and noisy.
To get the best quality you absolutely need to use the ground cable and lower the volume on channel 1 connected device (not the mixer) to 30% while only going 50% on the mixer itself, this will remove any background noise while boosting the volume nicely. If you plug in already hot output to the channel 1 it will be very loud and distorted since it was designed with mic in mind. The channel 2 is quieter so you can go as high as 70% on the mixer without distortion however I noticed that if you go well over 70% it starts to distort badly.
So in short use your synth/input volume knobs instead of the mixer and you will be fine.
0
0
Report