HM
Loose fit
The female side (guitar cable connection) of these are really loose fit. You'll have to make sure the cable has connection by pulling or applying a pressure on the connecting cable.
2
0
Report
A
Usefull for dj's and musicians
Almost all of my equipment is connected tru jack terminals but i have some that only have rca terminals and it becomes a problem trying to connect everything.
Most of the rca connectors that I have are on dj's specific equipment, I dont know really why, but that seems to be the standard, so this piece of kit comes very handy when I want to think outside the box and, for example, want to connect a cd player to my pedalboard so i can process the signal getting new sounds.
It feels sturdy, light weight, connects the terminals very well, secure them like a boss, it is very well made and it is very useful for many applications.
I didn't experience any signal loss and, when i measured the electrical resistance, I've got very low values so it should be fine for any studio or musician. I didn't measure the frequency response but I'm not expecting to have any problem from a device like this in my applications.
I would recommend the sssnake 1811 Adapter for any studio because for a very low price, even if you don't need it right now, it will be useful somewhere down the road.
Most of the rca connectors that I have are on dj's specific equipment, I dont know really why, but that seems to be the standard, so this piece of kit comes very handy when I want to think outside the box and, for example, want to connect a cd player to my pedalboard so i can process the signal getting new sounds.
It feels sturdy, light weight, connects the terminals very well, secure them like a boss, it is very well made and it is very useful for many applications.
I didn't experience any signal loss and, when i measured the electrical resistance, I've got very low values so it should be fine for any studio or musician. I didn't measure the frequency response but I'm not expecting to have any problem from a device like this in my applications.
I would recommend the sssnake 1811 Adapter for any studio because for a very low price, even if you don't need it right now, it will be useful somewhere down the road.
0
0
Report
S
does the ting,no problems
I'm ok with it, the holes aren't tight for it to hold the jack sometimes but it's doable
0
0
Report
m
bit finicky but works
With some jack cables the contact can not always be made inside the adapter.
With a little wiggling it does.
Not the best build quality, but cheap.
With a little wiggling it does.
Not the best build quality, but cheap.
0
0
Report
TP
Perfect product, terrible photos.
In the listing it looks extremely cheap, but once I got it it was extremely high quality, it's been holding up extremely well even with heavy use and tons of unplugging/plugging. Great product!!
0
0
Report
A
Great little piece
Perfect adaptor, just what i was looking for, perfectly converts a 1/4 inch jack to RCA, the only thing i would say is that they come a bit loose after a while and potentially the 1/4 inch jack could become disconnected, i would like to see more friction between the adaptor and the 1/4 inch jack lead.
0
0
Report
M
A little loose...
I guess it really depends on the other jacks you're using, but this does feel a little loose and unreliable. Wiggling around a little bit can keep it stable, but probably not reliable for frequent live use.
0
0
Report
MH
Does exactly what I want.
I mean, it's just an adapter but it works it, turned up pretty quickly and it hasn't broken yet.
0
0
Report
BJ
RCA jack is tight
Well built but the RCA jack is too tight almost as if it is a metric vs imperial fractional measurement difference.
0
0
Report
JG
Decent quality converters
Bought this to convert my record player to 1/4" jacks and it does the job.
0
0
Report