To the page content
seventy years logo
Join Thomann's Anniversary! We reward your loyalty with special offers! Get your deals

Rode PSA-1

1565

Professional Table Microphone Boom Arm

  • For table mounting
  • For radio, podcaster, pro and broadcaster
  • 3/8" Thread
  • For microphones from 700 g to approx. 1.1 kg
  • Rotates 360 degrees
  • Dimensions of the arms: 820 mm horizontal, 840 mm vertical
  • Colour: Black
  • Incl. Table mounting accessories: Screw clamps for table tops up to 55 mm and hollow bolts for table tops up to 70 mm
Available since June 2007
Item number 114512
Sales Unit 1 piece(s)
Type Microphone Boom
Height 820 mm
Colour Black
Weight 1,8 kg
Show more
£66
Including VAT; Excluding £10 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
Delivery approx. between Monday, 21.10. and Tuesday, 22.10.
1

For microphones weighing up to 1.1kg

With the PSA-1, Australian manufacturer Rode offers a professional table microphone boom arm with 360-degree swivel range in a solid, practical design that reliably holds in position microphones weighing between 700g and 1.1kg mounted on a 3/8" thread. The microphone arm offers more precise placement than a conventional table stand and, on top of that, it also has a more space-saving design, as it is attached directly to the tabletop by means of a screw clamp. The scope of delivery also includes a threaded desk insert for table mounting and a thread adapter for microphone mounts with 5/8" thread.

Thread on the Rode PSA-1 Professional Table Microphone Boom Arm

With spring-reinforced construction

The Rode PSA-1 microphone arm features a simple, elegant, black powder-coated construction with two arm sections that are articulated at three points and held under tension by a spring mechanism. The head, i.e. the microphone's attachment point, can be tilted, rotated, and locked via a handy winged screw, while the overall construction dispenses with further locking screws and is balanced by the spring mechanism and the microphone's weight. Since the PSA-1 does not have an integrated XLR cable, the model is also equipped with hook-and-loop fasteners to allow cables to be secured.

Joint of the Rode PSA-1 Professional Table Microphone Boom Arm

Always the right balance

The solidly constructed Rode PSA-1 has already impressed many users since its introduction. Despite the lack of locking screws on the joints, the PSA-1 easily balances microphones within the specified weight range so that positions can be held securely at any height. The tiltable, rotatable head makes it possible to align the microphone at any time, even when it is firmly screwed in place. The PSA-1 is therefore an ideal tool for microphone recordings at desktop workstations, whether as a podcast or videocast creator, influencer, radio presenter, audio engineer, or musician.

Screw clamp on the Rode PSA-1 Professional Table Microphone Boom Arm

About Rode

Founded in Sydney, Australia in 1990, Rode is a specialist in high-quality studio microphones. With its very first in-house, completely Australian-built model, the NT2 large-diaphragm microphone, the company created a classic which is still produced in its current and enhanced version, the NT2-A. An extensive range of studio and live microphones has also been added, regularly updated, and expanded over the years. These new additions include a variety of professional microphones which are designed for video and mobile applications and can be connected directly to SLR cameras or smartphones.

Enhanced comfort when working

Once the visually appealing clamp has been attached to the edge of the table to save space, the Rode PSA-1 can easily be plugged in, rotated, and easily adjusted to the desired working position. It is just as easy to return the microphone arm to a resting position at the side of the table after recording. The high degree of flexibility provided by the PSA-1's three joints offers creative professionals a great deal of freedom in the positioning of the microphone. Many different positions can be adopted, allowing the user to work comfortably at desktop workstations in any situation without having to make major setup changes.

1565 Customer ratings

4.7 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

stability

quality

877 Reviews

RP
Lack in quality even though it's relatively expensive
Rode PSA-1 07.06.2021
TLDR: Hinges and internals are not greased from factory which causes unnecessary wear and noise upon use.

I have experienced what seems to be an "issue" with ALL PSA-1 arms. It squeaks and there's a metal grinding noise. One of the hinges can be oiled from the outside (which should not be ungreased/unoiled on such an expensive product) but there's a pin that is also ungreased on the inside that requires light disassembly to get to which is ridiculous. Once all this is done the arm functions properly. This is not a "problem" per se since Rode seem to not do this at the factory and are obviously aware since this happens to what seems to be everyone that bothers to even check their product before use, if they do not later notice it during. This will most likely never be fixed because of how long this product has been on the market.

The quality itself is closer to a 4 but gets a 2 star because of the problem above. Stability is decent but is a bit wobbly if your desk isn't stable.
quality
stability
11
3
Report

Report

Ag
Perfect combination!
Audio geek 09.05.2021
As part of a studio rebuild I bought four of these booms to replace some aging and very twangy booms of dubious origin! Our main studio uses the SM7B and the PSA-1 supports these very well, balance is perfect and with a little patience feeding the mic cable through the channel in the upper leg of the arms and down through the centre of the base spigot gives a superbly sleek finish. As our guest positions were a custom made desk it was great to to use the circular flush desk mount drilled into the surface with its neat nylon collar (to avoid metal on metal) and a chrome bezel with the Rode logo on it. Nice touch of quality from end to end. The SM7B is hung from the spigot in it's classic formation and looks the part but he only point to note is the microphone's XLR connector casting restricts the horizontal movement a little at extremes but this isn't detrimental to normal use.

Overall the Rode quality is present and these booms represent excellent value for money. They have an adequate reach and style without being overly like staring at an angle poise lamp draped across the desk. Every house should have one!
quality
stability
3
0
Report

Report

AU
Very impressed
Andy, UK 17.01.2019
This desktop stand works well.

I used the standard base to clamp it to my desk (instead of the option to drill a hole in the desk) and this is stable with zero wobble in the base. Everything seems well made and sturdy.

Without a mic when you move the arm the springs move it toward a neutral position when you release the arm. After mounting a mic, that stops.

I mounted a Rode NT1-A Complete Vocal Recording on the end. With that weight on the arm, it is nicely balanced, easy to move, and stays where I put it without adjusting any clamps. It has a reach of more than a metre, and rotates very easily - the arm turns smoothly on the base, and the mic turns freely on the arm. Nice and flexible.

One minor downside - the arm has parallel metal bars which move closer or further apart as you move the arm up and down. These have squared edges and you can nip your fingers a bit if you hold that wrong.

Very happy - very good stand
3
0
Report

Report

JF
Absolute must for any studio
Joe Fahy 16.05.2017
Iv been in quite a few studios and there is nothing worse when you need to move the mic arm while live and you can hear it moving.

I have this setup at home with the Rode Procaster and PSM1 mount and im really happy with how it sounds.

One piece of advice is to take note of the warning when your unpacking the arm when it says that its spring loaded. I managed to catch my thumb in it.

Before I attached the mic I was concerned that the mic wouldn't be in the right location as the arm kept sticking up in the air due to the springs, however once I attached the procaster mic the arm sits exactly where I want it to be.

When the time comes to add further mic's to the home studio, the PSA-1 will definitely be on the shopping list.
5
0
Report

Report

YouTube on this topic