pro snake TPA 1003 MJ

Many mixers have jack outputs for their auxes. Shove one of these in and you can use XLR the rest of the way to the monitor amp.

Handy to have a few of these around, I do location recording and it's always worth having a range of adapters / convertors to help with interfacing the various bits of kit, or even to send a headphone output down a long XLR for instance.

Well made, quality connectors which dismantle so you can service them easily should you need to.

Saved me from cable management. I used it to connect my interface with ARC Studio

Good quality. Works as it should.
Perfect for less demanding studio connections - like headphone amplifiers etc.

I use this to patch my X32 aux sends to the 2x 16 XLR patch bay

Good quality cable, used as backup for live setting when I want to connect my wired in-ear monitor with and the only have a jack out

There is nothing else I can say about it, if a cable works it gets 5 starts, if it doesn't it gets 0 stars

Nice adapter cable for a very good price! The pins are used as always with the commen setting:
pin 1 - shield
pin 2 - left
pin 3 - right
The xlr jack is very well manufactured and keeps tight inside the the mixer (or wherever you put it). The stereo jack isn't that tight as different ones, but since it is only an adapter cable it absolutely fullfills it's job. Note that the cable is really short (shorter than it looks on the picture). I suggest a longer one for most of the occasions one needs it (Thomann provides also a longer version).

I see no reason to pay double price for the regular adaptor without cable. It's not as compact, but you have more flexibility with extra 30 cm of cable in between the plugs.

I'm using this cable for plugging in my radio unit into a mixer. Works fine, no problems at all. It's solid build for the price you cannot expect more. If you need such an adapter, this is the best choice!