To the page content

Rean NYS 202

268 Customer ratings

4.5 / 5

quality

63 Reviews

Rean NYS 202
£1.42
All prices incl. VAT
In stock
1
A
Sound great and are good for the money
Anonymous 22.06.2016
I am a professional Guitarist and composer for film and TV

I needed to make some extra long stereo cables to use with my metal band for running backing tracks from our interface and laptop to the front of house. I believe we made 15 meter cables in the end with one of these on each end.

The cables performed perfectly for hundreds of gigs and sounded awesome! Not once did we have a cable fail on us which is important because if the backing tracks go down then it all sounds terrible.

we used Sommer cable to make the cables with and soldered these to the ends. They are very easy to solder on and took 5 minutes each end.

They are Neutrick so you are getting the quality associated with the brand. They are really cheap - i just bought some XLRs that were almost £4 each end and this added up fast but these are nothing in comparison.

I would strongly advise making some stero cables, they come in very handy! I have used these as well to run DJ equipment Live and ipods into my PA.

Pros:
very cheap
Sound awesome
Neutrick quality

Cons:
Takes time to assemble
None
quality
0
0
Report

Report

A
It's a jack
Anatoly 20.03.2019
Good quality jack, works perfectly.
quality
0
0
Report

Report

A
Alchemist_ 27.01.2023
I like that they are small.. I use them for switching in a home pedalboard.
quality
0
0
Report

Report

A
the best.
Anonymous 06.10.2015
cheap, sturdy, easy to solder, easy to hold and handle, not too thick, will take every cable. Jack plugs as they should be. A couple of years ago, I did find some with a slightly sharper edge on the inside where the cable goes in. Never happened since though... (I have ordered hundreds of these)
quality
0
0
Report

Report

M
Great for installation work
MartinQ 25.07.2020
Neutrik TRS jacks are a lot more expensive and if your doing a patchbay installation and the cables wont get too much tugging and abuse - I recommend these jacks as a cost effective solution
quality
0
0
Report

Report

AR
They are famous for one reason
Alexander R. 514 27.05.2013
I don´t like to have wires longer than I need, and the best way to have the perfect size with a good price is to make them by yourself.
I checked a lot of different websites looking for good connectors, and Neutrik was always the most mentioned.
To build my wires with them was easy. And even they are not the the fanciest, the quality is really good.
I recommend this product.
quality
0
0
Report

Report

A
Great Connectors
Andrei_Sev 26.01.2023
Have been using this connector for a long time and I am very satisfied about them.
quality
0
0
Report

Report

EB
Great!
Edgar Blackdagger 12.05.2021
Great quality, both in sound and feel, I use them (both the mono and the stereo version) in the studio and gigs, I have no complaints whatsoever!
quality
0
0
Report

Report

A
Neutrik Balanced Jack
Anonymous 04.09.2014
In my opinion these are the best value plugs you can buy for patchbay / semi permanent installations. They are very durable and easy to solder. The also de / re solder very easily without melting! I would get something a little more substantial for an instrument cable but for most applications they are great.
quality
0
0
Report

Report

C
Rean TRS 1/4" jacks
Chris606 06.11.2013
Compact body -many jack plugs fit closely together, good for looms and multicores.
Easy to solder but be careful -the ring & tip solder tabs can break if you bend them too many times.
Good value for money.
quality
0
0
Report

Report

Rean NYS 202