Millenium DS-45

These are great, I bought them to use with the Genelec Z8030-408 mounts. Theyre really good and sturdy, BUT, they have put these awful stickers on them that flake off EVERYWHERE. I took them off before putting them together.

For a cheap solution for mounting Genelecs, theyre great !

Meiner Meinung nach ein super Ständer. Er ist stabil und hält, was er verspricht. Einziger Abzug ist, dass er nicht genau so ankommt, wie auf den Vorschaubildern - ohne Golfballmuster und etwas kantiger - passt aber trotzdem.

exactly what i needed, very tiny and intended for tabletop use but i use it to mic my amp in my bedroom set up. with a solid base for your microphone you can get away with improvising other things to adjust the height etc. very heavy + stable and the included adaptor is a welcome touch. soft base to avoid scratching surfaces. i have also used this with a camera, quite handy all things considered. the price is right!

Super stable and will support most mics easily,even fairly heavy ones. Works perfectly with my Behringer XM8500 using a K&M 216 5/8'' to 3/8'' Thread Adapter

exactly the kind of stand I needed. I use it for a condenser microphone on a table. It is very sturdy and the base is quite heavy, so I have never had the microphone tip over, which is very important if you have expensive microphones. The only comment I have about the product is that when I received the goods and unpacked them, the thread in the cast iron base was corroded probably due to storage, but anti-corrosion spray and a brush fixed it. For me, it is a perfect stand for a perfect price.

This little stand was perfect for miking up kick drums and amps. Its cheap and handy.

Very happy with our purchase, they have proven invaluable at a number of events and seem to be quite robust especially for the price.

The base is very stable and well built, all that I needed.
I like the fact that it comes with a adapter to accomodate not only 3/8" but also 5/8" threads.

Very good stand . We use some of them on conference table.

I use it for a rode nt1 which came with it's own BIG mount and it barely holds it in place which, in my opinion, is a big thing.
It does not fall as is, so anything smaller or easier, this tripod will handle like a breeze,