J
Great.. BUT....
These are great, I bought them to use with the Genelec Z8030-408 mounts. Theyre really good and sturdy, BUT, they have put these awful stickers on them that flake off EVERYWHERE. I took them off before putting them together.
For a cheap solution for mounting Genelecs, theyre great !
For a cheap solution for mounting Genelecs, theyre great !
1
0
Report
K
Good for its price, works as intended
Materials feel high quality, microphone stands on it perfectly, without no hassle.
Has rubber-like bottom, which grips on my wooden table very well.
You need to screw it in precisely, if you have good screw which comes with microphone you can also angle your microphone, otherwise you're just stuck with a stiff angle.
I would recommend for the price if you're going on a budget setup.
Has rubber-like bottom, which grips on my wooden table very well.
You need to screw it in precisely, if you have good screw which comes with microphone you can also angle your microphone, otherwise you're just stuck with a stiff angle.
I would recommend for the price if you're going on a budget setup.
0
0
Report
J
Stabil
Meiner Meinung nach ein super Ständer. Er ist stabil und hält, was er verspricht. Einziger Abzug ist, dass er nicht genau so ankommt, wie auf den Vorschaubildern - ohne Golfballmuster und etwas kantiger - passt aber trotzdem.
0
0
Report
h
do you really need any more than this ?
exactly what i needed, very tiny and intended for tabletop use but i use it to mic my amp in my bedroom set up. with a solid base for your microphone you can get away with improvising other things to adjust the height etc. very heavy + stable and the included adaptor is a welcome touch. soft base to avoid scratching surfaces. i have also used this with a camera, quite handy all things considered. the price is right!
0
0
Report
D
S
Super stable and will support most mics easily,even fairly heavy ones. Works perfectly with my Behringer XM8500 using a K&M 216 5/8'' to 3/8'' Thread Adapter
1
0
Report
MV
Robust and stable
exactly the kind of stand I needed. I use it for a condenser microphone on a table. It is very sturdy and the base is quite heavy, so I have never had the microphone tip over, which is very important if you have expensive microphones. The only comment I have about the product is that when I received the goods and unpacked them, the thread in the cast iron base was corroded probably due to storage, but anti-corrosion spray and a brush fixed it. For me, it is a perfect stand for a perfect price.
0
0
Report
Sw
Perfect
This little stand was perfect for miking up kick drums and amps. Its cheap and handy.
0
0
Report
S
Happy with general quality and functionality of this table tripod
I needed a tripod like this for my field recordings, where I can place my mics and recorder on a little heavier and not so big tripod like this one. Practical for travelling and came in a small practical package for travelling.
0
0
Report
UT
Sturdy and cost effective
Very happy with our purchase, they have proven invaluable at a number of events and seem to be quite robust especially for the price.
0
0
Report
A
Nice option
The base is very stable and well built, all that I needed.
I like the fact that it comes with a adapter to accomodate not only 3/8" but also 5/8" threads.
I like the fact that it comes with a adapter to accomodate not only 3/8" but also 5/8" threads.
0
0
Report