Göldo EL903 Shield Screen

I bought this a while back and applied it today on a Harley Benton TE52, on which I did the 4-way-switch mod. After shielding the pickguard, I can only hear a low 60 cycle hum when using only the single coils. Did the job exceptionally. Covered almost the entire standard Telecaster pickguard, not sure it would cover eg a 72 custom Tele or a Strat pickguard.

It came wrinkly but you can fix that by forcing a plastic card on it when applying.

Non conductive adhesive means that sheets are not connected to each other after application. You have to solder them together or connect through some metal pieces like potentiometers, switches, etc. It's actually not that much of a problem. Other than that the product is fine.

It cut out a lot of hiss but it needs to be installed correctly, the sticky side is non-conductive so I had to make bridges to complete the circuit. Nevertheless a good product for the price.

as many other shielding foils it does not have a conductive glue hence you have to find alternative ways to ensure the contact with the pieces. Given the price, though, it is something I can live with :)
Be sure to order at least 2 / 3 pieces.

Best thing is this product has sticky surface so you don't need to use glue to attach it

note: if you like to apply all surface of guitar. Buy at least 2

it's good but why it is so wrinkled?