EarthQuaker Devices ZEQD PRE - Tube Preamp/Booster

Effect Pedal for Electric Guitar

Analogue Tube PreAmp / Booster
Equipped with 3-band EQl, headphone output, balanced XLR output and analogue cabinet/speaker simulation
With EF86 tube, placed at the end of the signal chain for dynamics and sound with tube characteristics
Two sound options: Boost or 3-band EQ with separate level control
On/Off via Activate footswitch
The boost footswitch disables the tone control and provides a full-range boost without changing the frequency response
Active when the activation switch is turned on
Bass EQ: 20 to 400 Hz
Midrange EQ: 400 Hz to 2,000 Hz
Treble EQ: 2,000 to 20,000 Hz
Level control for the output when the tone controls are active
Boost control for the output when the boost is active and the tone controls are bypassed
Ground lift switch (side) to disconnect the XLR output from the ground network
Cab Bypass (side) activates/deactivates the analogue cabinet simulation on the XLR output
Side headphone output: 6.3 mm stereo jack / 1/4" TRS
Side direct out balanced XLR output
Mechanical true bypass footswitch
Headphone output impedance: 39 ohm
Status LEDs
Input and output: 6.3 mm mono jack
Power supply with optional 9 V DC mains adapter (not included), 2.1 x 5.5 mm barrel connector, centre negative
Power consumption: 500 mA
Dimensions (L x W x H): 149 x 100 x 70 mm
Weight: 569 g
Made in USA

Note Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.