DirectOut ACE Dante Version

DirectOut ACE - Dante Version (ESD); audio interface; audio interface, routing matrix, DSP processing and redundancy management based on the FPGA architecture of the DirectOut PRODIGY series; DSP processing including EQ, dynamics, delay and system tools (depending on mode); one of three ACE operating modes selectable upon registration for different applications: playback mode - quick setup of main and backup systems, vocal inserts and output routing including redundancy management (EARS); PA mode - complete drive rack solution with EQ, dynamics, delays and integrated smaart analysis; PRODIGY mode - free routing, mixing, summing, snapshots and complex signal paths as used in large installations; additional modes can be added via optional licenses from the manufacturer; technical data: input sensitivity: -55 dBu to +24 dBu; switchable +48 V phantom power; sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (+/-12.5%); supports MADI and Dante; A/D converter: SNR @ 0 dB gain: -118 dBFS RMS (20 Hz - 20 kHz), THD @ -1 dBFS: -113 dB, EIN @ 60 dB gain: -118 dBu (20 Hz - 20 kHz); D/A converter: SNR: -119 dB (20 Hz - 20 kHz), THD+N @ -0 dBFS: -109 dB (@ +24 dBu); headphone outputs: 4x 6.3 mm TRS & 1x 3.5 mm TRS; 4x mic/line inputs via DSUB-25; 4x line outputs via DSUB-25; 4x AES3 stereo ports (8 in / 8 out) via DSUB-25; 4x MADI SFP slots (without transceiver); 2x RJ45 (1 Gbit/s) audio network & 1x RJ45 (1 Gbit/s) management; word clock: 2x BNC (75 Ohms, switchable termination); GPIO: 2x GPI voltage inputs (DSUB-9) & 2x GPO MOSFET switch (DSUB-9); USB for control: 1x USB 2.0 (type A) & 1x USB 3.1 (type C, lockable); power supply: 2x USB-C (lockable, redundant supply) 20V, max. 60W; 3.5" IPS touch display with backlight and 340x800 px; dimensions (width x height x depth): 310 mm x 44 mm (1U) x 210 mm; weight: approx. 2.5 kg