Search Results - Page 1 - "(B-Stock) DAS Audio AX-VT20 Flybar for Vantec Line Arrays/Subwoofers"

DAS Audio Vantec-20A

2

Class-D bi-amp power amplifier
Power: 750 W RMS / 1500 W peak
1" Compression driver

QSC LA108

1

Line Array System
Power: 1300 watts (1000 watt woofer + 300 watt tweeter)
Class D amplifier

DAS Audio EVENT-26A

Equipped with 2 x 6" woofer, 1" HT driver
Power: 400 W RMS and 800 W Peak
Class-D Bi-Amp power amplifier

dB Technologies DVA K5

5

Equipped with: 8" woofer bandpass, 6.5" horn loaded midrange driver incl. phase ...
Frequency range: 70 - 19,000 Hz
Peak SPL: 129 dB

RCF HDL 20-A

8

2x 10" RCF Woofer with 2.5" VC
2" RCF Driver with 3" VC
Digital bi-amped incl. DSP

RCF HDL 6-A

7

Equipped with: 2 x 6" RCF woofer with 2" voice coil, 1" RCF high-frequency driver with 1.75" voice coil
Digital Bi-Amped including DSP
Power: 1400 W / PRG, 700 W / RMS

RCF HDL 12-AS

2

Equipped with: 1 x 12" Neodymium with 3" voice coil woofer
Power: 1400 W (PRG) / 700 W (RMS)
Digital Bi-Amped incl. DSP

RCF HDL 6-A KART Bundle

Equipped with: 2 x 6" RCF woofer with 2" voice coil, 1" RCF high-frequency driver with 1.75" voice coil
Digital Bi-Amped including DSP
Power: 1400 W / PRG, 700 W / RMS

QSC LA112

1

Line Array System
Power: 2400 watt (1600 watt woofer + 800 watt tweeter)
Class D amplifier

RCF HDL 10-A

13

2x 8" RCF Woofer with 2" VC
2" RCF Driver with 2.5" VC
Digital bi-amped incl. DSP

Dante AVIO Install 2Ch Analog Output

1

Enables the output of analogue audio line signals from a Dante network
96 kHz / 32 Bit
Fully functional Dante interface

pro snake 79830-10 XLR Multicore 10m

34

Amphenol connector: XLR 2-pin male to female
Length of the split cable ends: 0.4 m
Total length of the cable : 10 m

Kürschner Tenor- / Bass-Viol Strings Set

3

Complete set in medium gauge consisting of 6 strings
Suitable for 440 Hz
d' , a and e: Oiled gut

pro snake 79830-5.0 XLR Multicore 5m

23

Amphenol connector: XLR 3-pin male to female
Split length: 0.4 m
Cable length: 5 m

FBT Mitus 206LA

1

Power: 900 W RMS (1800 W peak)
Class-D Bi-Amp System
Equipment: 2x 6.5" woofer with 1.7" VC, 1x 1.4" high frequency driver with 2.5" VC

SSL Alpha 8

10

32 bit / 192 kHz
Configurable levels for each input and output: +24/+20/+18/+9 dBu
DC-coupled outputs

the box pro A 10 LA Line Array Module

5

Active dual 10" and dual 1.4" line array
2800 W RMS power amplifier on board
Max. sound pressure level: 131 dB SPL

Image-Line FL Studio Producer Edition

467

Pattern and track-based structure with combined step- and clip-oriented workflow
MIDI programming via step sequencer with up to 64 steps or piano roll
Complete audio recording and editing with direct-to-disk recording, offline rendering, and Edison audio editor

pro snake 79830-3.0 XLR Multicore 3m

18

Amphenol connector: XLR 2-pin male to female
Length of the split cable ends: 0.4 m
Total length of the cable : 3 m

API Audio 512v Preamp

12

Microphone preamp with 65 dB gain
Line and instrument pre-amplification with 45 dB gain
Button for 3: 1 output transformer

Neutrik NA-2I2O-DLINE

7

For connecting analogue audio equipment to a Dante network
Requires Power over Ethernet (PoE)
Converts two analogue line signals to Dante

Image-Line FL Studio Signature Bundle

129

Pattern and track-based structure with combined step- and clip-oriented workflow
MIDI programming via step sequencer with up to 64 steps or piano roll
Complete audio recording and editing with direct-to-disk recording, offline rendering, and Edison audio editor

DAS Audio Vantec-218A

4

Class-D amplifier
Power: 2000 W RMS / 4000 W peak
Drivers: 2x 18" woofers

RCF Fly Bar NXL24

1

For up to two RCF NXL24-A

Sennheiser CL2 - Line Cable

64

For Sennheiser EW systems
Mini jack plug (screw-on) to XLR female
Length: approx. 150 cm

Allen & Heath AR2412

106

For Allen & Heath Qu consoles
24 XLR mic / line inputs
12 XLR line outputs (L/R)

DAS Audio Vantec-12A

5

Class-D bi-amp power amplifier
Power: 750 W RMS / 1500 W peak
1" Compression driver

Image-Line FL Studio All Plugins Edition

37

Pattern and track-based structure with combined step- and clip-oriented workflow
MIDI programming via step sequencer with up to 64 steps or piano roll
Complete audio recording and editing with direct-to-disk recording, offline rendering, and Edison audio editor

Line6 HX Stomp XL

71

More than 300 HX, legacy amps, speakers and effects
Supports third-party impulse responses (IRs)
Exceptional sound quality with 123 dB dynamic range

Line6 Pod GO

305

Over 300 effects and models from the Helix Series, M Series and Legacy Series
Up to 6 amp, cabinet and effect models simultaneously
Includes looper and speaker cabinet simulation (third-party IR loading)

Line6 Helix Guitar Processor

300

Next generation dual DSP-based HX modelling engine with four discrete stereo signal paths
50 guitar amp models, 12 bass amp models, 37 cabinets, 17 microphones and 104 effects
Imports IRs (impulse responses) with up to 1024 / 2048 samples in length

Gewa Tenor Viola da Gamba Bow

Round bar from Massaranduba
Ebony frog
Total length: 69 cm

Walrus Audio Canvas Stereo

44

In pedal size
Converts an unbalanced signal to a balanced signal for direct connection to a mixing desk or audio interface
Works perfectly with Amp-in-a-Box pedals, such as the Walrus Audio ACS1

Walrus Audio Canvas Nano Line Isolator

3

Compact utility pedal for balanced signal routing when used with amp modellers, for example
Converts an unbalanced TS signal to balanced XLR out with full signal strength
Specially wound transformer for low THD and linear frequency response (20 to 20,000 Hz)

Line6 DC-3I Power Supply

32

For POD HD 300/400/500x and HD Bean, Firehawk FX, Amplifi 30/TT/FX100, HX Stomp, HX Effects and POD Go
Input: 100 - 240 V AC, 50 - 60 Hz
Output: 9 V DC, 3 A (27 W max)

Cordial CFM 3 MV

2605

Balanced male jack to male XLR
Cable cross-section: 2 x 0.20 mm²
With Neutrik (Rean) connectors

Cordial CFM 6 MV

850

Balanced male jack to male XLR
Cable cross-section: 2 x 0.20 mm²
With Neutrik (Rean) connectors

Cordial CFM 5 VK

1067

6.3 mm Male jack to 6.3 mm female jack
Stereo jack plug to stereo jack socket
Made by REAN (Neutrik)

Ferrofish Pulse16 AE

4

DAC ESS ES9017 / ADC: ESS ES9840Q
32-bit / 192 kHz
Two colour displays for levels and settings for a complete overview of all levels and settings on the device

Line6 HX Stomp

400

Multi-effect processor with the helix sound
Over 300 effects and models from the Helix, M series and other Line6 products
8 Simultaneously usable amplifiers, cabinets and effect blocks - including looper and IR loading

Cordial CFM 6,0 VV

649

6.3 mm Balanced male jack to 6.3 mm balanced male jack
Cable cross-section: 2 x 0.20 mm²
With Neutrik (Rean) connectors

Sommer Cable Epilogue RCA Cable 1,0

19

Ideal for connections with the highest of demands (pre/power amplifier, CD player, ...
A very neutral, colouration-free and spatial sound for the perfect reproduction, especially of classical instruments
The absolute reference in many renowned recording and mastering studios

Cordial CFM 10 VK

725

Length: 10 m
6.3 mm Male jack to 6.3 mm female jack
Stereo jack plug to stereo jack socket

Cordial CFM 1,5 MV

2039

Connectors: Balanced male jack to male XLR
Cable Cross-section: 2 x 0.20 mm²
With Neutrik Rean connectors

Cordial CFM 3,0 VV

1143

6.3 mm Balanced male jack to 6.3 mm balanced male jack
Cable cross-section: 2 x 0.20 mm²
With Neutrik (Rean) connectors

Cordial CFU 3 PC

1007

6.3 mm Male jack to male RCA
Cable cross-section: 1 x 0.22 mm²
With Neutrik (Rean) connectors

Cordial CFM 9 MV

437

Length: 9 m
Jack balanced male -> XLR male
Cable cross-section: 2 x 0.20 mm²

Cordial CFM 3 FV

677

Balanced male jack to female XLR
Cable cross-section: 2 x 0.20 mm²
With Neutrik (Rean) connectors

pro snake TRS Audio Cable 1,5m

386

Length: 1.5 m
6.3 mm angled jack male balanced to 6.3 mm jack male balanced
Made with Amphenol plugs

Heritage Audio Super 8

8-Channel transformer-coupled Class-A microphone preamplifier and AD/DA converter 24 bit / 192 kHz
3-Stage Class-A preamps in 73 style
Carnhill transformer

Your search for "<b>(B-Stock) DAS Audio AX-VT20 Flybar for Vantec Line Arrays/Subwoofers</b>" did not result in any hits.

Results for similar keywords

Served with love!

Your search for "<b>(B-Stock) DAS Audio AX-VT20 Flybar for Vantec Line Arrays/Subwoofers</b>" did not result in any hits.

Results for similar keywords