M
It's definitely a cable
Bought these for routing purposes, and they do it just fine. The cable could be a bit thicker, but that's on me I suppose, as the product page mentions the diameter of the cable, I just missed that. Theyre good cables, if You need double jacks, these really will tidy up your space and make it much more manageable. The connectors are good and sturdy, the soldering is neat, all in all good stuff. I wouldn't trust them on the road, as you'd have to be relatively careful with them, but then again, they aren't really meant as a pofessional, touring cables. Though if You are neat, they'll definitely do the job. As far as home studios go, they're great, don't pick up external noise and are well made. Would recommend.
1
0
Report
G
Ideal for Stereo Looper.
I'm using this to connect my Dito Stereo Looper to a variety of possibilities, example DSL to Right/Left (stereo) jacks of my Korg Kross 2 / Roland FA08 and as well DSL to Roland Octapad.
In a few words, if you have a stereo effect pedal, whatever it is, a Looper, Wah, or whatever comes with Stereo possibility, this is is the cable you will need.
In a few words, if you have a stereo effect pedal, whatever it is, a Looper, Wah, or whatever comes with Stereo possibility, this is is the cable you will need.
0
0
Report
S
Annoying detail
The cable works fine and it's doing what is supposed to be doing. There is an annoying detail, though: the cable comes with 2 little cubic bloks that hold the 2 wires together. These little plastic blocks are cannot be moved accross the length of the cable and it was really frustrating. I wanted to connect my audio interface to my speaker monitors but could not do it because these cubic plastic blocks where too high up on the lenght of the cable (on both sides). Luckily, the material of these limiters was really soft, so i just cut one of them with a knife
0
0
Report
j
Simple and effective cable
I use this cable to send the output of my mixer to my audio interface for recording. That works perfectly.
0
1
Report
MK
Good quality little cable
I use it to connect my Zoom Multi Stomp MS-70 CDR to my Behringer Xenyx QX1832USB. It is of a good quality. Recommended.
0
0
Report
A
Works perfectly.
I use them for my speakers, i.e., as an output from the sound card. So far, I haven't had any issues, and I hope I won't have any in the future. I wholeheartedly recommend them.
0
0
Report
T
Excellent value
Solid and sturdy cable with good connectors. Very good value!
0
0
Report
ef
Lightweight
Cheap and cheerful, will do a job.
0
0
Report
T
Does what it says on the tin, good quality too
0
0
Report
EM
Yup
Awesome price and good quality short connector for interface to monitors.
0
0
Report