ChainMaster D8+ Ultra DC 500kg 18.75m H-H

Electric Chain Hoist

• Hoist standard: D8Plus (2nd brake, load reduction 50%)
• Suspension in hook-to-hook design
• Direct control
• Two DC brakes, maintenance-free models
• Use in normal or climbing position
• Low noise emission
• Two handles

Technical data:

• Model designation: SK030 / 76U
• Lifting speed: 4 m/min
• Max. load capacity: 500 kg
• Load side of the chain: One
• Load chain according to EN 818-7: P5.4 x 15 mm
• Chain length: 18.75 m
• Suspension: Swivel hook
• Chain container
• Weight (without chain): 20 kg
• Chain weight: Approx. 0.59 kg/m
• Motor power: 0.37 KW
• Operating voltage: 3 - 400 V / 3 - 230 V
• 1m CEE-16/4 connection cable
• IP protection rating: IP55

Note: The chain hoists are factory approved. The factory inspection is documented in the crane logbook. The declaration of conformity and the CE mark attached to the chain hoist are only valid in conjunction with the use of phase reversal controls that meet the following standards as minimum requirements: DIN-60204-32, EN-13849-1, SQP2 Section 4.1.1.

In all other cases, the supplied installation declaration applies.